我的位置：
| XTP T VGA | |||
|
|||
| Video | |||
|---|---|---|---|
| Gain | Unity | ||
| Resolution range | Up to 1920x1200 or 1080p (HDTV) | ||
| Maximum pixel clock | 165 MHz | ||
| Formats | RGB, component video, S-video, composite video | ||
| Video input and loop-through | |||
| Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video (YUVi or YUVp/HDTV), S-video, or composite video input 1 buffered RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video (YUVi or YUVp/HDTV), S-video, or composite video loop-through |
||
| Connectors | 2 female 15-pin HD | ||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.45 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 30 kHz to 100 kHz | ||
| Vertical frequency | 24 Hz to 120 Hz | ||
| Interconnection between transmitter and receiver | |||
| Connectors | 1 female RJ-45 per unit | ||
| Termination standards | TIA/EIA T568B | ||
| Signal transmission distance | 330' (100 m) using shielded twisted pair or XTP DTP 24 cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (Shielded Twisted Pair) | ||
|
|||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | <0.1%, 20 Hz - 20 kHz at nominal level | ||
| S/N | >90 dB, at maximum balanced output (unweighted) | ||
| Crosstalk | ≤-80 dB @ 1kHz, fully loaded | ||
| Stereo channel separation | >80 dB @ 1 kHz | ||
| Audio input | |||
| Number/signal type | 1 analog stereo, balanced/unbalanced or 1 analog stereo, unbalanced |
||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole 1 female 3.5 mm mini stereo jack |
||
| Impedance | 10k ohms unbalanced, 20k ohms balanced | ||
| Nominal level | +4 dBu balanced, -10 dBV configurable | ||
| Maximum level | +7 dBv unbalanced | ||
| Input gain adjustment | -18 dB to +24 dB, 1 dB steps, adjustable | ||
|
|||
| Communications — transmitter | |||
| USB control ports | 1 front panel female mini USB B | ||
| USB standards | USB 2.0, low speed | ||
| Program control | Extron control/configuration program for Windows ? Extron Simple Instruction Set (SIS ? ) |
||
| Communications — external device (pass-through, unidirectional or bidirectional) | |||
| Serial control port input/output | 1 set of proprieraey signals on a female RJ-45 jack | ||
| Serial control port output/input | RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port) | ||
| Baud rates | Up to 115200 baud | ||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
| Ethernet pass-through port | 1 female RJ-45 connector | ||
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
| IR control port | (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz |
||
| IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
||
| Power consumption | |||
| Device | 11.5 watts, 12 VDC | ||
| Device and power supply | 14.2 watts, 12 VDC | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on sides and top | ||
| Thermal dissipation | |||
| Device | 38.9 BTU/hr | ||
| Device and power supply | 48.1 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U high rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | 1.2 lbs (0.5 kg) | ||
| Shipping weight | 3 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | CE**, c-UL, UL, C-tick, FCC Class A**, ICES, VCCI Complies with the appropriate requirements of RoHS and WEEE. |
||
|
|||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4454-D12) | |||
