| MTP SW6 |
|
| Video |
| Gain |
Unity |
|
| Video input — see MTP Series transmitter specifications |
| Number/signal type |
6 sets of proprietary analog signals |
| Connectors |
6 female RJ-45 |
|
| Video output — See MTP Series receiver specifications |
| Number/signal type 1 set of proprietary analog signals |
| Connectors |
1 female RJ-45 |
| Maximum resolution |
1920x1200 |
| NOTE |
Refer to the user's manual for the maximum distances recommended for specific resolutions. |
|
|
| Audio |
| Number/signal type |
1 set of proprietary analog signals |
| Connectors |
1 female RJ-45 |
| Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response |
20 Hz to 20 kHz, ±1 dB |
| THD + Noise |
0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N |
>70 dB at maximum output (unweighted) |
| CMRR |
>43 dB @ 20 Hz to 20 kHz |
|
| Audio input — see MTP Series transmitter specifications |
| Number/signal type |
6 sets of proprietary analog signals |
| Connectors |
6 female RJ-45 |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — local |
| Number/signal type |
1 dual mono, balanced/unbalanced |
| Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±1 dB channel to channel |
| Maximum level (Hi-Z) |
>+18 dBu, balanced or unbalanced at 1% THD+N |
| Maximum level (600 ohm) |
>+15 dBm, balanced or unbalanced at 1% THD+N |
|
| Audio output — see MTP Series receiver specifications |
| Number/signal type |
1 set of proprietary analog signals |
| Connectors |
1 female RJ-45 |
|
| Control/remote — switcher host control |
| Serial control port |
1 RS-232, 9-pin female D connector |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configuration |
2 = TX, 3 = RX, 5 = GND |
| Program control |
Extron's control/configuration program for Windows?
Extron's Simple Instruction Set (SIS ? ) |
|
| Control/remote — external device (pass-through) |
| Serial control port |
RS-232, 3.5 mm captive screw connector,5 pole (uses 3 poles) |
| Baud rate and protocol |
Up to 38400 baud; 5-8 data bits; 1 or 2 stop bits; odd, even, or no parity; XON, XOFF, or no flow control |
| NOTE |
Protocol is mirrored between the switcher and the receiver. |
|
| Serial control pin configuration |
1 = TX, 2 = RX, 3 = GND |
|
| General |
| Recommended cable type |
CAT5/5E/6 (shielded or unshielded) |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated |
| Power input requirements |
12 VDC, 0.8 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, vents onright and leftsides |
| Mounting |
|
| Rack mount |
Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01 orRSB 129, 60-604-01) or 1U, 6" deep rack shelf (RSU 126, #60-190-10 orRSB 126, 60-604-10) |
| Furniture mount |
Yes, with optional Under-Desk Mounting Kit (MBU 125, part #70-077-01) |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 8.7" W x 6.0" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connector and knob.) |
| Product weight |
1.2lbs (0.5 kg) |
| Shipping weight |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, CUL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (7.6-100908-D7) |
