我的位置:

愛思創Extron電子-用于 VGA 和音頻信號的延長距離 MTP 雙絞線接收器-MTP 1500RL 15HD A SEQ
廠家報價:面議
產品狀態:(在產)
用于 VGA 和音頻信號的延長距離 MTP 雙絞線接收器 MTP 1500RL 15HD A SEQ
產品品牌:
愛思創EXTRON
產品類別:
產品中心
地址:中國上海市松江區茸華路 686 號
電話:4000.398766、 021-3760 1568(聯系就說在DAV音視工程網上看到的)
經銷商 | 聯系方式 | 價格 |
---|---|---|
愛思創Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
MTP 1500RL 15HD Series | |||
Video | |||
---|---|---|---|
Gain | Unity | ||
Number/signal type | 1 set of proprietary analog signals | ||
Connectors | 1 female RJ-45 | ||
Video input — see MTP Series transmitters specifications | |||
Video output — receivers | |||
Number/signal type | 1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi- or tri-level sync), S-video, or composite video |
||
Connectors | 1 female RJ-45 1 female 15-pin HD |
||
Nominal level | 1 V p-p for Y of component video and S-video, and for composite video 0.7 V p-p for RGB and for R-Y and B-Y of component video 0.3 V p-p for C of S-video |
||
Minimum/maximum levels | 0.3 V to 1.45 V p-p | ||
Impedance | 75 ohms | ||
Return loss | <-30 dB @ 5 MHz | ||
DC offset | <±35 mV with input at 0 offset | ||
Skew compensation | 62 ns | ||
Maximum resolution | Up to 1600x1200 and 1080p at 1500'; 1920x1200 and 2048x1080 at 1200' | ||
Sync | |||
Output type | RGBHV, RGBS, RGsB, RsGsBs | ||
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
Output level | 0.3 Vp-p for component video (bi-level sync) 0.6 Vp-p for component video (tri-level sync) TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS |
||
Output impedance | 110 ohms | ||
Polarity | Positive or negative (switch-selectable) | ||
Audio — MTP 1500RL 15HD A SEQ | |||
Number/signal type | 1 set of proprietary analog signals | ||
Connectors | 1 female RJ-45 | ||
Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
S/N | >70 dB at maximum output (unweighted) | ||
Stereo channel separation | >60 dB @ 1 kHz | ||
CMRR | >43 dB @ 20 Hz to 20 kHz | ||
Audio input — See MTP Series transmitters specifications | |||
|
|||
Audio output —MTP 1500RL 15HD A SEQ | |||
Number/signal type | 2 mono, balanced/unbalanced | ||
Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Gain error | ±1 dB channel to channel | ||
Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
Maximum level | +18 dBu, unbalanced at 1% THD+N | ||
Control/remote — external device (pass-through, unidirectional or bidirectional) — RS model only | |||
Serial control ports | |||
Input/output | 1 set of proprietary signals on a female RJ-45 jack | ||
Output/input | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | ||
Baud rates | Up to 38400 bps at up to 1000' (300 m) | ||
Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none |
||
|
|||
Serial control pin configuration | Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND | ||
General | |||
Recommended cable type | CAT 5/5e/6 (shielded or unshielded) | ||
Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
||
Power input requirements | 12 VDC, 1.0 A max. | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Convection, vents sides to top | ||
Mounting | |||
Rack mount | Yes, with optional 1U rack shelf | ||
Wall mount | Yes, with optional wall mounting kit | ||
Enclosure type | Metal | ||
Enclosure dimensions | 1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
Product weight | 1 lb (0.5 kg) | ||
Shipping weight | 2lbs (1 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
Product warranty | 3 years parts and labor | ||
|
|||
|
|||
(8.0-100511-D11) |