我的位置：
| TLP Pro 525T Series | |||
| Display | |||
|---|---|---|---|
| Screen type | TFT Active matrix color LCD | ||
| Size | 5" (12.7 cm), measured diagonally | ||
| Resolution | 800x480 (WVGA) | ||
| Pixel density | 186.6 PPI | ||
| Aspect ratio | 5:3 | ||
| Color depth | 24 bit, 16.7 million colors | ||
| Transparency | 8 bit | ||
| Brightness | 850 nits (cd/m2) | ||
| Contrast | 700:1 | ||
| Backlight | LED | ||
| Viewing angle | ±70° horizontal, ±70° vertical | ||
| Touch screen | Capacitive | ||
| Storage | |||
| RAM | 2 GB | ||
| Storage | 4 GB | ||
| Ethernet | |||
| Connectors | 1 female RJ-45 connector | ||
| Data rate | 10/100/1000Base-T, half/full duplex with autodetect | ||
| Protocols | DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1 |
||
| Software | |||
| Configuration software | Global Configurator Plus and Professional, GUI Designer | ||
| Programming software | Global Scripter | ||
| Control apps | Extron Control, iGVE | ||
| Resource management software | GlobalViewer Enterprise, iGVE | ||
| Utilities | Toolbelt, Embedded web page | ||
| Sensors | |||
| Motion sensor | On/off | ||
| Light sensor | Auto/manual | ||
| USB | |||
| Quantity/type | 1 high-speed USB 2.0 | ||
| Connectors | 1 USB type A connector | ||
| Standards | USB 2.0, USB 1.1, USB 1.0 compatible | ||
| Max. data rates | Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps) | ||
| Audio output | |||
| Speaker output | 1 mono, 86 dB 6SPL, 0.1 watt, 0.1 m, half space | ||
| Frequency response | 750 Hz to 20 kHz, ±5 dB | ||
| Playback format(s) | |||
| Container format | WAV (Microsoft RIFF) | ||
| Encoding | LPCM (uncompressed) | ||
| Bit depth | Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit |
||
| Sampling rate | Up to 192 kHz | ||
| Audio channels | Mono or stereo | ||
| General | |||
| Power supply | Not included | ||
| Power input requirements | Power over Ethernet (PoE 802.3af, class 3) | ||
| Power consumption — Power injector (XTP PI 100) | |||
| Device | 7.7 watts | ||
| Device and power injector | 10.0 watts | ||
| Auxiliary power output | |||
| USB | 5 VDC, 275 mA | ||
| Temperature/humidity | Storage:-4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on back | ||
| Thermal dissipation — Power injector (XTP PI 100) | |||
| Device | 21.6 BTU/hr | ||
| Device and power injector | 29.4 BTU/hr | ||
| Mounting | Set on a tabletop | ||
| Enclosure type | Plastic | ||
 |
|||
| Enclosure dimensions | 3.88" H x 5.95" W x 2.88" D (9.9 cm H x 15.1 cm W x 7.3 cm D) |
||
| Product weight | 1.45 lbs (0.65 kg) | ||
| Regulatory compliance | BIS, CE, C-tick, c-UL,FCC ClassB, ICES, RoHS, UL, VCCI, WEEE | ||
| Product warranty | 3 years parts and labor; touchpanel display and overlay components are covered for 1 year | ||
|
|||
|
|||
|
|||
| (4616-D3) | |||
