愛思創Extron電子-Two-Way 70/100 V SpeedMount Ceiling Speaker System-CS 1226T Plus

　　The Extron CS 1226T Plus SpeedMount ^? Ceiling Speaker System is a patented low profile, plenum rated two-piece speaker system. It is comprised ofa CS120P plenum rated enclosure and a CS26T Plus two?way speaker cartridge. The CS120P enclosure installs quickly into 2' x 2' (61 cm x 61 cm) or metric 600 mm x 600 mm suspended ceiling grids. The CS26T Plus speaker cartridge features a 6.5" (165mm) woofer and a 3/4" (19 mm) ferrofluid-cooled dome tweeter in a coaxial design, withan innovative tweeter bridge that delivers smooth off-axis response. It offers wide 112° conical coverage for flexibility in speaker spacing, and can be used in 70/100 volt or 8ohm operation. The CS1226TPlus is available as a complete assembly, or the CS120P and CS26T Plus can be purchased separately to accommodate division-of-labor installations.

　　The Extron CS 1226T Plus SpeedMount ^? Ceiling Speaker System is a patented low profile, plenum rated two-piece speaker system. It is comprised ofa CS120P plenum rated enclosure and a CS26T Plus two?way speaker cartridge. The CS120P enclosure installs quickly into 2' x 2' (61 cm x 61 cm) or metric 600 mm x 600 mm suspended ceiling grids. The CS26T Plus speaker cartridge features a 6.5" (165mm) woofer and a 3/4" (19 mm) ferrofluid-cooled dome tweeter in a coaxial design, withan innovative tweeter bridge that delivers smooth off-axis response. It offers wide 112° conical coverage for flexibility in speaker spacing, and can be used in 70/100 volt or 8ohm operation. The CS1226TPlus is available as a complete assembly, or the CS120P and CS26T Plus can be purchased separately to accommodate division-of-labor installations.

　　The innovative, patented two-piece design of the SpeedMount Ceiling Speaker System greatly simplifies installation of ceiling speakers, especially when a large quantity is needed for a facility. Instead of waiting until the final phase of installation, when ceiling access is limited, a low-voltage contractor can begin during rough-in by placing a CS120P enclosure into the ceiling grid, and running speaker cable through it. This leaves the AV installer with a simple procedure of connecting the CS26TPlus speaker cartridge to the wiring and securing it into the enclosure.

　　1' x 2' Plenum Rated Enclosure

　　The CS120P plenum rated enclosure features a shallow 5" (12.7cm) profile, which simplifies installation into congested ceiling spaces around piping and ducts. The integrated tile bridge of the enclosure rests with the ceiling tileon the grid, evenly distributing the weight of the enclosure and the CS26TPlus. This avoids the need to assemble V?rails and C?rings, greatly reducing the number of installation steps and the chance of losing installation hardware. Additionally, the CS120P is reinforced to minimize acoustical vibrations.

　　Two-Way Speaker Cartridge

　　The CS 26T Plus speaker cartridge installs quickly and easily into the CS120P enclosure. With a frequency range of 42Hz to 20kHz, the CS26T Plus is optimized for a wide range of paging and audio presentation applications for music, program, and voice. Music reproduction is enhanced with the exceptional low-frequency response of the woofer. An innovative tweeter bridge provides smooth off-axis response and offers wide 112° conical coverage for flexibility in speaker spacing and placement. The CS26TPlus features a power rating of 60watts continuous pink noise and 120watts continuous program capacity, as well as a tuned bass reflex port optimized for the CS120P enclosure.

　　The CS26TPlus speaker cartridge offers both direct 8ohm or 70/100volt operation with a behind-the-grille, six?position selector switch. For room balancing with 70/100volt systems, the selector switch allows for 32, 16, 8, 4, and 2watt settings in 70volt operation, and 32, 16, 8, and 4watt settings for 100volt operation.

　　The CS26TPlus features a thin-edge bezel for a refined appearance on the ceiling. The grille attaches magnetically to the baffle and quickly snaps into place. The white grille and bezel can be painted to match the architectural elements of the environment.

　　特性

　　Patented two-piece speaker system for suspended ceilings in division-of-labor installations —

　　CS 120P plenum ceiling tile enclosure, 1' x 2' (30.5cm x 61cm), pair

　　CS 26TPlus two-way speaker cartridge, pair

　　Enclosure and speaker cartridge can be purchased as individual components and installed separately by low-voltage and AV system contractors

　　Provides significant time and cost savings in ceiling speaker installation

　　6.5" (165 mm) long-throw woofer with a tuned bass reflex port

　　3/4" (19 mm) ferrofluid-cooled dome tweeter mounted on an innovative honeycomb tweeter bridge

　　8 ohm direct or 70/100 volt operation on a six-position, behind-the-grille selector —

　　8 ohm direct

　　70 volt: 32, 16, 8, 4, and 2watt selectable

　　100 volt: 32, 16, 8, and 4watt selectable

　　Frequency range: 42Hz to 20kHz, -10dB, half space

　　Frequency response: 58Hz to 16kHz, ±3dB, half space

　　60watts continuous pink noise 120watts continuous program

　　112° conical dispersion provides wide coverage and allows for flexible speaker placement

　　Internal driver overload protection

　　Thin bezel and magnetically attached grille

　　Grille and bezel are available in white only and may be painted to match environment

　　Spring-loaded locking arms on the CS26TPlus for quick installation

　　Fast-installing enclosure speeds installation; no tile bridge necessary

　　UL2043 plenum rated enclosure

　　UL 1480 listed for safety

　　Low profile, 4.9" (12.4cm) deep enclosure for plenum environments

　　Compatible with US 2' x 2' ceiling grids and metric 600mm x 600mm ceiling grids

　　Reinforced enclosure minimizes acoustical vibrations

　　5 year parts and labor warranty

　　示意圖

　　面板圖