| XTP CrossPoint? CP DVI I/O Boards |
|
| Video —XTP CP 4i DVI Pro, XTP CP 4o DVI Pro |
| NOTE |
*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. |
|
| Gain |
Unity |
| Resolution range |
Up to 1920x1200*, 2k, or 1080p @ 60 Hz
*Reduced blanking |
| Signal type |
Single link DVI digital video signals are supported. |
| Digital video |
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video) or 2k |
| NOTE |
These XTP CP DVI Pro boards are compatible with HDMI. |
|
| Digital audio |
Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
| EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP |
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards |
| HPD |
Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum pixel clock |
165 MHz |
| Standards |
DVI 1.0, HDMI 1.3, HDCP 1.1 |
| Switching speed |
200 ns, max. |
| Video format |
DVI and HDMI |
| Audio format |
Analog stereo, Dolby? Digital?, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS?, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio ? , up to 8ch PCM, Dolby Atmos |
|
| Video input — XTP CP 4i DVI Pro |
| Number/signal type |
4 digital RGB single link DVI-D (or HDMI*) |
| Connectors |
4 female DVI-I (digital only) |
| Equalization |
Automatic |
| Input cable length |
Up to 100' (30 m) at 1920x1200, 2k,or 1080p @ 60 Hz |
| NOTE |
Lower resolutions may support longer transmission distances. Transmission distance varies depending on the signal resolution, type of cable, and source device used in the system. |
|
|
| Video output — XTP CP 4o DVI Pro |
| Number/signal type |
4 digital RGB single link DVI-D (or HDMI*) |
| Connectors |
4 DVI-I (digital only) |
| Re-clocking |
Automatic |
| Peripheral device power |
5 VDC, 250 mA per output |
|
| Audio input — XTP CP 4i DVI Pro |
| Number/signal type |
4 stereo, balanced/unbalanced |
| Connectors |
(4) 3.5 mm captive screw connector, 5 pole |
| Supported formats — Pass through |
|
| HDMI/DVI Pro connector |
LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel, Dolby Atmos |
| Analog connector |
Analog stereo audio |
| Impedance |
>10k ohms unbalanced/balanced, DC coupled |
| Nominal level |
+4 dBu (1.228 Vrms) |
| Maximum level |
+21 dBu balanced, +15 dBu unbalanced |
| Input gain adjustment |
-18 dB to +18 dB, adjustable per input; default = 0 dB |
|
| Audio output — XTP CP 4o DVI Pro |
| Number/signal type |
4 stereo, balanced/unbalanced |
| Connectors |
(4) 3.5 mm captive screw connector, 5 pole |
| Supported formats — Pass through |
|
| HDMI/DVI Pro connector |
LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel, Dolby Atmos |
| Analog connector |
Analog stereo audio |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
>+21 dBu, balanced or unbalanced at 1% THD+N |
| Maximum level (600 ohm) |
>+20 dBm, balanced or unbalanced at 1% THD+N |
| Volume control range |
-75.8 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0dB) |
| NOTE |
Attenuation = volume number minus 64. The default is 0 dB = volume number 64. |
|
|
| General |
| Power |
Supplied by XTP CrossPoint or XTP II CrossPoint enclosure |
| Power consumption |
|
| XTP CP 4i DVI Pro |
19 watts |
| XTP CP 4o DVI Pro |
16 watts |
| Product weight |
2.0 lbs (0.9 kg) |
| Regulatory compliance |
|
| Environmental |
Complies with the appropriate requirements ofRoHS, WEEE. |
| Product warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (8.1-030316-D2) |
