我的位置:

經銷商 | 聯系方式 | 價格 |
---|---|---|
愛思創Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
XTP CP 4K I/O Boards | |||
![]() Specifications |
|||
---|---|---|---|
![]() |
|||
Frame rate 1 | 24, 25, 30, 50, or 60 fps | ||
Chroma sampling 1 | 4:4:4, 4:2:2, or 4:2:0 | ||
Color bit depth 1 | 8 bits per color | ||
Signal type 1 | Refer to XTP endpoints | ||
Max. video data rate 1 | 10.2 Gbps (3.4 Gbps per color) | ||
|
|||
Video — XTP CP 4i 4K, XTP CP 4o 4K | |||
Gain | Unity | ||
Resolution range | Up to 2560x1600 @ 60 Hz* or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 with 4:2:0 chroma subsampling * reduced blanking |
||
Signal type | Single-link HDMI (or DVI-D or DisplayPort) | ||
Maximum data rate | 10.2 Gbps (3.4 Gbps per color) | ||
Maximum pixel clock | 300 MHz | ||
Video formats | RGB and YCbCr digital video | ||
Standards | Refer to XTP endpoints | ||
Switching speed | 200 ms (max.) | ||
Audio format | Analog stereo, Dolby? Digital? Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos? , DTS?, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio? , up to 8ch PCM, | ||
Shielded twisted pair interconnection | |||
Number/signal type | 4 sets of proprietary signals | ||
Connectors | 4 female RJ-45 per board | ||
Termination standard | TIA/EIA T568B | ||
Signal transmission distance | 330' (100 m) using shielded twisted pair or XTP DTP 24 cable | ||
|
|||
Cable requirements | Solid conductor, 24 AWG or better | ||
Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
Communications — external device (pass-through, unidirectional or bidirectional) | |||
Serial control pass-through ports | RS-232 (±5 V)via (4) 3.5 mm, 5-pole captive screw connectors (uses 3 poles) (connector is shared with IR control ports) |
||
Baud rates | 300 to 115200 baud | ||
Protocol | 5 to 8 data bits 1 or 2 stop bits no parity (default), even or odd parity flow control Xon, Xoff, and none |
||
Serial control pin configuration | 1 = Tx, 2 = Rx, 3 GND | ||
IR control ports | (4) 3.5 mm. 5-pole captive screw connectors (uses 3 poles) (connector is shared with RS-232 control ports) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz |
||
IR control pin configuration | 3 = GND, 4 = IR Tx, 5 = IR Rx | ||
Ethernet pass-through ports | 4 female RJ-45 | ||
Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
General | |||
Power | Supplied by XTP CrossPoint or XTP II CrossPoint enclosure | ||
Power consumption | |||
XTP CP 4i 4K | |||
PoE | 79 watts (XTP CrossPoint 1600, XTP CrossPoint 3200, XTP II CrossPoint 1600, and XTP II CrossPoint 3200) 95 watts (XTP II CrossPoint 6400) |
||
No PoE | 35 watts | ||
XTP CP 4o 4K | |||
PoE | 75 watts (XTP CrossPoint 1600, XTP CrossPoint 3200, XTP II CrossPoint 1600, and XTP II CrossPoint 3200) 90 watts (XTP II CrossPoint 6400) |
||
No PoE | 21 watts | ||
Product weight | 2.0 lbs (0.9 kg) | ||
Regulatory compliance | |||
Environmental | Complies with the appropriate requirements ofRoHS, WEEE. | ||
Product warranty | 3 years parts and labor | ||
|
|||
|
|||
(4563-D6) |