我的位置:

經銷商 | 聯系方式 | 價格 |
---|---|---|
愛思創Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
SW HD 4K Series | |||
specification | |||
---|---|---|---|
![]() |
|||
Frame rate 1 | 24, 25, 30, 50, or 60 fps | ||
Chroma sampling 1 | 4:4:4, 4:2:2, or 4:2:0 | ||
Color bit depth 1 | 8 bits per color | ||
Signal type | HDMI 1.4, HDCP 1.4 | ||
Max. video data rate | 10.2 Gbps (3.4 Gbps per color) | ||
|
|||
Video | |||
Maximum data rate | 10.2 Gbps (3.4 Gbps per color) | ||
Maximum pixel clock | 300 MHz (600MHz for 4K with 4:2:0 chroma subsampling) | ||
Resolution | Up to 1920 x 1200 or 1080p @ 60 Hz, 12-bit color 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling |
||
Formats | RGB and YCbCr digital video | ||
Standards | DVI 1.0, HDMI 1.4, HDCP 1.4 | ||
|
|||
Video input | |||
Number/signal type | 2, 4, 6,or8 (depending on model)single link HDMI (or DVI-D*) | ||
Connectors | 2, 4, 6, or 8 female HDMI | ||
Video output | |||
Number/signal type | 1 single link HDMI (or DVI-D*) | ||
Connectors | 1 female HDMI | ||
|
|||
Communication — Switcher | |||
Serial control port | 1 RS-232, 3.5 mm,3 polecaptive screw connector | ||
Pin configuration | 1 = Tx, 2 = Rx, 3 = GND | ||
Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
Auto-input switching | (1) 3.5 mm,2 pole captive screw connector | ||
Pin configuration | Pins1 and2 of captive screw connector shorted together enable auto-input switching | ||
Contact closure | |||
SW2 HD 4K | (2) 3.5 mm captive screw,3 pole (shared with Tally output) | ||
SW4 HD 4K | (4) 3.5 mm captive screw,3 pole (shared with Tally output) | ||
SW6 HD 4K | (6) 3.5 mm captive screw,3 pole (shared with Tally output) | ||
SW8 HD 4K | (8) 3.5 mm captive screw,3 pole (shared with Tally output) | ||
Tally output | |||
SW2 HD 4K | (2) 3.5 mm captive screw,3 pole (shared with Contact closure) | ||
SW4 HD 4K | (4) 3.5 mm captive screw,3 pole (shared with Contact closure) | ||
SW6 HD 4K | (6) 3.5 mm captive screw,3 pole (shared with Contact closure) | ||
SW8 HD 4K | (8) 3.5 mm captive screw,3 pole (shared with Contact closure) | ||
Tally output power | (1) 3.5 mm captive screw, 3 pole for +5 VDC, 0.2 A | ||
IR controller module | IR 102 remote control (optional) 30' maximum, 40 degrees off axis |
||
Program control | Extron Simple Instruction Set? (SIS?) | ||
General | |||
Power supply | |||
SW2 HD 4K, SW4 HD 4K | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
||
SW6 HD 4K, SW8 HD 4K | Internal Input: 100-240 VAC, 50-60 Hz |
||
Power consumption | |||
SW2 HD 4K, SW4 HD 4K | |||
Device | 6 watts, 12 VDC | ||
Device and power supply | 8 watts, 12 VDC | ||
SW6 HD 4K, SW8 HD 4K | 13.1watts | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Convection, no vents | ||
Thermal dissipation | |||
SW2 HD 4K, SW4 HD 4K | |||
Device | 19.8 BTU/hr | ||
Device and power supply | 24.4 BTU/hr | ||
SW6 HD 4K, SW8 HD 4K | 43.6BTU/hr | ||
Mounting | |||
SW2 HD 4K, SW4 HD 4K | |||
Rack mount | Yes, with optional 1U rack shelf | ||
Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit | ||
SW6 HD 4K, SW8 HD 4K | |||
Rack mount | Yes, with supplied mounting brackets | ||
Enclosure type | Metal | ||
Enclosure dimensions | |||
SW2 HD 4K, SW4 HD 4K | 1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) (4.4 cm H x 22.2 cm W x 7.6 cm D) (Depth excludes connectors.) |
||
SW6 HD 4K, SW8 HD 4K | 1.75" H x 17.5" W x 8.5" D (1U high, full rack wide) (4.4 cm H x44.4 cm W x21.6 cm D) (Depth excludes connectors.) |
||
Product weight | |||
SW2 HD 4K, SW4 HD 4K | 0.5 lb (0.3 kg) | ||
SW6 HD 4K, SW8 HD 4K | 2.5 lbs (1.1 kg) | ||
Regulatory compliance | CE, C-tick, c-UL, KC-mark, UL, FCC Class A, ICES, VCCI Complies with appropriate requirements of RoHs and WEEE. |
||
Product warranty | 3 years parts and labor | ||
Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
(4436-D8) |