我的位置：
| 經銷商 | 聯系方式 | 價格 |
|---|---|---|
| 愛思創Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
| FOX Tx AV | |||
|
|||
|
|||
|
|||
|
|||
| Optical fiber interconnection between transmitter and receiver | |||
|---|---|---|---|
| Number/type | 1 or 2 fiber optic | ||
|
|||
| Connectors | 2 LC connectors | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a FOX Tx AV SM | ||
| Multimode | 500 m (1640') with 62.5 μm multimode (MM) cables with a FOX Tx AV MM 1 km (3280') with 50 μm multimode cables with a FOX Tx AV MM 2 km (6561') with 50 μm, 2000 MHz bandwidth laser optimized multimode cables with a FOX Tx AV MM |
||
|
|||
| Nominal peak wavelength | 850 nm for FOXTx AVMM, 1310 nm for FOX Tx AV SM | ||
| Data rate | 2.125 Gbps | ||
| Transmission power | -5 dBm, typical | ||
| Maximum receiver sensitivity | |||
| Singlemode | -18 dBm, typical | ||
| Multimode | -12 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 13 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Video | |||
| Gain | Unity | ||
| Standards | |||
| Input | NTSC 3.58, NTSC 4.43, PAL, SECAM, autodetected | ||
| Output | NTSC 3.58, PAL (follows vertical rate) | ||
| Decoder type | Adaptive 2D, digital comb filter | ||
| Video input | |||
| Number/signal type | 1 component (Y, R-Y, B-Y), S-video, composite video | ||
| Connectors | 1 x 3 female BNC or 1 female 4-pin mini DIN for S-video | ||
| Nominal level | 1.0 Vp-p for Y of component videoand S-video, andfor composite video 0.7 Vp-p for R-Y, B-Y of component video 0.3 Vp-p for C of S-video |
||
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Return loss | -30 dB for Y/VID, B-Y/C, R-Y @ 5 MHz | ||
| Input coupling | AC | ||
| Audio | |||
| Gain | |||
| Range | Adjustable, -18 dB to +10 dB | ||
| Default | Unbalanced output: -6 dB; balanced output: 0 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.15% @ 1 kHz at nominal level | ||
| S/N | >80 dB at maximum output (unweighted) | ||
| CMRR | 65 dB @ 20 Hz to 20 kHz | ||
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
| Sampling rate | 48 kHz | ||
| Audio input | |||
| Number/signal type | 1 stereo, balanced/unbalanced or 2 mono, balanced/unbalanced |
||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | >10k ohms unbalanced, >20k ohms balanced, DC coupled | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | +17 dBV, (unbalanced) at 1% THD+N | ||
|
|||
| Control/remote | |||
| Serial control ports on each unit (transmitter and receiver) | |||
| Control | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel); in parallel with front panel jack 1 RS-232, 2.5 mm mini stereo jack (front panel) |
||
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel) | ||
| Baud rate and protocol | |||
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Pass-through | 9600 to 115200 baud | ||
| Serial control pin configurations | |||
| Pass-through | Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND | ||
| Control | Captive screw connector: 3 = GND, 4 = Tx, 5 = Rx Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND |
||
| Program control | Extron control/configuration program for Windows ? Extron Simple Instruction Set (SIS ? ) |
||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC,1 A, 12 watts |
||
| Power input requirements | 12 VDC, 0.6 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on left side and top | ||
| Mounting | |||
| Rack mount | Yes, with optional rack shelf kit | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide) (4.3 cm H x 10.9cm W x 15.2cm D) (Depth excludes connectors.) |
||
| Product weight | 0.8lbs (0.4 kg) per unit, 1.6 lbs (0.7 kg) per pair | ||
| Shipping weight | 3lbs (2 kg) per unit, 6 lbs (3 kg) per pair | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, CUL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (8.1-112114-D2) | |||
