數字音視工程網

微信公眾號

數字音視工程網

手機DAV

null
null
null
null
null
null
null
null
null
null
null
null
null
null
艾索
null
null
null
null
null
招商,
null

我的位置:

用于 HDMI、音頻和 RS-232 信號的光纖發送器-PowerCage FOX Tx HDMI圖片
  1. 用于 HDMI、音頻和 RS-232 信號的光纖發送器-PowerCage FOX Tx HDMI圖片

愛思創Extron電子-用于 HDMI、音頻和 RS-232 信號的光纖發送器-PowerCage FOX Tx HDMI

廠家報價:面議 產品狀態:(在產)

用于 HDMI、音頻和 RS-232 信號的光纖發送器 PowerCage FOX Tx HDMI

產品品牌: 愛思創EXTRON
產品類別: 產品中心
咨詢 加入收藏 我要評價
咨詢
所在單位:*
姓名:*
手機:*
職位:
郵箱:*
其他聯系方式:
咨詢內容:
驗證碼:
不能為空 驗證碼錯誤
確定
愛思創電子(上海)有限公司_愛思創Extron中國

廠商介紹: 愛思創電子(上海)有限公司(愛思創Extron中國)全球總部位于美國加州,是世界領先的專業視音頻系統集成產品的生產商。愛思創Extron產品主要包括視音頻控制系統、計算機視頻接口、切換器、矩陣切換器、分配放大器、音頻放大器、揚聲器、雙絞線和光纖設備、視頻圖像解析度轉換器、視音頻信號處理器、視音頻流媒... [詳細]

經銷商 聯系方式 價格
愛思創Extron電子 4000.398766、 021-3760 1568 面議
PowerCage? FOX Tx HDMI
NOTE The PowerCage FOX Tx HDMI board is not compatible with the FOX3GHD-SDI, FOX3GDVC, or FOXAV models.
NOTE The PowerCage FOX Tx HDMI board is available in singlemode or multimode version.
NOTE The PowerCage FOX Tx HDMI board is a class1 laser product. It meets the safety regulations of IEC-60825.
Optical fiber interconnection between fiber matrix switcher and receiver
Number/type 1 singlemode or 1 multimode fiber optic input and output per FOX board
NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit HDMI video with HDCP content or return data for bidirectional control and communication.
Connectors 2 bidirectional LC connectors per FOX board
Operating distance
Singlemode 30 km (18.75 miles) with singlemode (SM) cables with a SM board
Multimode 300 m (985') with 62.5 μm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 μm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 μm OM3/OM4 2000 MHz bandwidth laser optimizedMM cable and a MM board
NOTE Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM)
Transmission power, singlemode or multimode -5 dBm, typical
Maximum receiver sensitivity
Singlemode -18 dBm, typical
Multimode -12 dBm, typical
Optical loss budget
Singlemode 13 dB, maximum
Multimode 7 dB, maximum
Maximum channel data rate 4.25 Gbps
Video
NOTE Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input and output.
Maximum data rate 4.25 Gbps
Maximum pixel clock 165 MHz
Maximum resolution 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i,
1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI, HDCP 1.1, CEA-861E
Video input
Number/signal type 1 single link HDMI
Connectors 1 female 19-pin HDMI type A
Audio
NOTE On PowerCage FOX boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
Gain
Range Adjustable, -18 dB to +10 dB
Default Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response 20 Hz to 20 kHz, ±0.5 dB
THD + Noise 0.10% @ 1 kHz at nominal level
S/N >80 dB at maximum output (unweighted)
CMRR 65 dB @ 20 Hz to 20 kHz
Audio bits per sample 18 bits per channel, 2 channels (L, R)
Sampling rate 48 kHz
Audio input
Number/signal type 1 stereo, unbalanced or
2 mono, unbalanced
1 stereo, de-embedded from HDMI (2-ch, PCM only)
Connectors (1) 3.5 mm mini stereo jack
Impedance ≥10k ohms unbalanced, ≥20k ohms balanced
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level +8.9 dBV, unbalanced at 1% THD+N
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Control/remote
Serial control ports
Control 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port)
Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles, "RS-232 Over Fiber")
Baud rate and protocol
Control 9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through 9600 to 115,200 baud
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND
Program control Extron control/configuration program for Windows ?
Extron Simple Instruction Set (SIS ? )
General
Power Supplied by a PowerCage 1600 enclosure
Power consumption 6.02 watts
Power input requirements 12 VDC, 1.0 A, supplied by the PowerCage enclosure
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosure
Thermal dissipation 27.6 BTU/hr
Dimensions Each board fits a double slot opening in a PowerCage enclosure.
Product weight 1.1 lbs (0.5 kg)
Shipping weight 2 lbs (1 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
Environmental Complies with the appropriate requirements of RoHS, WEEE.
Product warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(8.1-121114-D4)
    null
lutube成人福利在线观看