| HFX 100 Tx/Rx |
| NOTE |
The HFX 100 TX/RX consists of a transmitter (HFX 100 TX) and a receiver (HFX 100 RX) with fiber optic cables linking the two units. |
|
| NOTE |
These devices are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11 |
|
|
| Optical fiber interconnection between transmitter and receiver |
| Number/type |
1 fiber optic, multimode (OM3 or OM4 fiber, must use 50/125 μm) |
| Connectors |
1 LC connector |
| Operating distance |
300 m |
| NOTE |
Operating distance is approximate. This is a typical maximum distance that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength |
850 nm (multimode) |
| Data rate |
6.25 Gbps |
| Transmission power |
|
| Multimode |
-7 dBm, typical |
| Maximum receiver sensitivity |
|
| Multimode |
-19 dBm, typical |
| Optical loss budget |
|
| Multimode |
12 dB, maximum |
|
| Video |
| NOTE |
*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
| Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz, 2k pixel for pixel @ 12 bit color depth |
| Formats |
RGB and YCbCr |
| EDID |
Pass through from Rx unit to Tx unit |
| HDCP |
Pass through |
| Standards |
DVI 1.0, HDMI, CEA-861E |
|
| Video input — transmitter |
| Number/signal type |
1 single link HDMI |
| Connectors |
1 Male HDMI, fixed cable 3.0' |
|
| Video output — receiver |
| Number/signal type |
1 single link HDMI |
| Connectors |
1 Male HDMI, fixed cable 3.0' |
|
| General |
| Power supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
| Power consumption |
|
| Transmitter |
12 VDC, 220 mA, 2.5 W |
| Receiver |
12 VDC, 175 mA, 2.1 W |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Thermal dissipation |
|
| Transmitter |
8.0 BTU/Hr |
| Receiver |
6.8 BTU/Hr |
| Mounting |
|
| Rack mount |
Yes, with optional 1U rack shelf |
| Furniture mount |
Yes, with optional ZipClip 200? or under-desk mounting kit |
| Pole mount |
Yes, with optional pole-mount kit |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 2.2" W x 3.0" D (1 U high, one-eigth rack wide)
(4.2 cm H x5.6 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| Product weight |
0.5lbs (0.3 kg) |
| Shipping weight |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, KCC, VCCI |
| Environmental |
Complies with the appropriate requirements of RoHS, WEEE |
| Product warranty |
3 years parts and labor |
| Everlast power supply warranty |
7 years parts and labor |
| NOTE |
All nominal levels are at ±10%. |
|
| NOTE |
Specifications are subject to change without notice. |
|
| (8.1-073114-D6) |
