| AXI 02 AT |
|
| Audio |
| Gain |
Unbalanced output: -6 dB, balanced output: 0 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.3 dB |
| THD + Noise |
<0.01% @ 1 kHz at maximum level |
| S/N |
|
| Digital In to Analog Out |
>115dB, 20 Hz to 20 kHz at maximum output (unweighted) |
| Crosstalk |
<-90 dB @ 1 kHz, fully loaded |
| Output attenuation |
-100 dB to 0 dB (in 1 dB steps) |
|
| Audio output — analog |
| Number/signal type |
2 mono (or 1 stereo), balanced/unbalanced |
| Connector |
(1) 3.5 mm captive screw connector, 6-pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Nominal level |
-10 dBV (316 mV) or +4 dBu (1.23 V) |
| Maximum level (Hi-Z) |
>+21 dBu balanced or >+15 dBu unbalanced |
|
| Audio output — digital |
| Number/signal type |
2 PCM (or 1 stereo) |
| Connector |
1 RCA connector |
| Impedance |
75 ohms |
|
| AT ports — audio transport |
| Transmission |
Dante |
| Connector |
1 RJ-45 connector to Dante interface |
| Inputs |
2 channels Rx (2 flows, unicast or multicast) |
| Audio format |
Uncompressed, 24-bit, selectable at 44.1, 48, 88.2, or 96 kHz |
| Latency |
Deterministic, based on user selection: 1.0 ms (default), 2.0 ms, 5.0 ms |
|
| General |
| Power input requirements |
Power over Ethernet (PoE 802.3af) |
| PoE power injector (optional) |
XTP PI 100 |
| Power consumption |
|
| Device |
3.2 watts |
| Device and power injector |
5.4 watts |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Thermal dissipation |
|
| PoE power injector (optional) |
XTP PI 100 |
| Device |
10.9 BTU/hr |
| Device and power injector |
18.3 BTU/hr |
| Mounting |
|
| Rack mount |
Yes, with optional 1U high rack shelf, with included ZipClip? 100 mounting clip, or by securing to rack rails with tie wraps |
| Furniture mount |
Yes, with included ZipClip? 100 mounting clip |
| Enclosure type |
Plastic |
| Enclosure dimensions |
1.62” H x 2.13” W x 4.42” D (1U high, one eighth rack wide)
(42 mm H x 55 mm W x 113 mm D) |
| Product weight |
0.25 lbs (0.1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-Tick, FCC Class A, ICES, VCCI Class A |
| Environmental |
Complies with the appropriate requirements of RoHS, WEEE |
| Product warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10% |
|
| NOTE |
Specifications are subject to change without notice |
|
| (4175-D4) |
