我的位置：
| 經銷商 | 聯系方式 | 價格 |
|---|---|---|
| 愛思創Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
| HC 402 EU/MK (HCT 101 EU/MK, HCR 102) | |||
|
|||
| Video input | |||
|---|---|---|---|
| Number/signal type | |||
| Digital | |||
| HCT 101 EU, HCT 101 MK | 1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter) | ||
| HCR 102 | 1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter) | ||
| Connectors | |||
| HCT 101 EU, HCT 101 MK | 1 female HDMI type A | ||
| HCR 102 | 1 female HDMI type A | ||
| HDMI equalization | Automatic | ||
| HDMI input cable length | ≤50' (15 m) for resolutions up to 1920x1200 or 1080p @ 60 Hz; 2K, using Extron HDMI Pro Series cable | ||
| Resolution range | 640x480 to 1600x1200 and 1920x1200*, 480p, 576p, 720p, 1080i, 1080p, and 2K *reduced blanking |
||
| Return loss | <-30 dB @ 5 MHz | ||
| DC offset (max. allowable) | 250 mV | ||
| Standards | DVI 1.0, HDMI 1.4, HDCP 1.4 | ||
| Interconnection between transmitter and receiver | |||
| Connector | 1 female RJ-45 on each unit (transmitter and receiver) | ||
| Termination standard | TIA/EIA T568B | ||
| Transmission distance | Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable with a 1080p, 60 Hz signal | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
| Video processing | |||
| Decoder | 12 bit digital (3D-adaptive comb filter) | ||
| Digital pixel data bit depth | 8, 10, or 12 bits per channel; 165 MHz pixel clock | ||
| Colors | 1 billion (10 bit processing) | ||
| Video output | |||
| Number/signal type | 1 HDMI (with CEC) | ||
| Connectors | 1 female HDMI | ||
| HDMI peripheral device power | 250 mA | ||
| Scaled resolution | 640x480 6,8,9 , 800x600 6,8,9 , 852x480 6,8,9 , 1024x768 6,8,9 , 1024x852 6,8,9 , 1024x1024 6,8,9 , 1280x768 6,8,9 , 1280x800 6,8,9 , 1280x1024 6,8,9 , 1360x765 6,8,9 , 1360x768 6,8,9 , 1365x768 6,8,9 , 1365x1024 6,8,9 , 1366x768 6,8,9 , 1400x1050 6,8 , 1440x900 6,8,9 , 1600x900 6,8 , 1600x1200 6,8 , 1680x1050 6,8 , 1920x1200 6,8 HDTV 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 2048x1080 1,2,3,4,5,6,7,8 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz |
||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | <0.1%, 20 Hz to 20k Hz at nominal level | ||
| S/N | >90 dB, at maximum input (unweighted) | ||
| Crosstalk | ≤-80 dB @ 1 kHz, fully loaded | ||
| Stereo channel separation | >80 dB @ 1 kHz | ||
| Audio input | |||
| Number/signal type | 2 digital audio, embedded in the HDMI signal | ||
| Connectors | 2 female HDMI Type A | ||
| Source formats | |||
| HDMI | LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel | ||
| Impedance | 10k ohms, DC coupled | ||
| Nominal level | -10 dBV, unbalanced | ||
| Maximum level | +6 dBV, unbalanced | ||
| CMRR | >60 dB typical, unbalanced, @ 1 kHz | ||
|
|||
| Audio output | |||
| Number/signal type | 1 analog, line level stereo, balanced or unbalanced (variable) 1 digital, embedded in HDMI (fixed) |
||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole 1 female HDMI |
||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.5 dB channel to channel | ||
| Maximum level (Hi-Z) | >+14 dBu, balanced; >+8 dBu, unbalanced | ||
| Output volume range | 0 to 100% in 1% steps | ||
| Communications | |||
| USB control port | 1 receiver front panel female USB mini-B | ||
| USB standards | USB 2.0, high speed | ||
| Program control | Extron Product Configuration Software (PCS) for Windows ? | ||
| Communications — control processor | |||
| Memory | |||
| SDRAM | 512 MB | ||
| Flash | 512 MB | ||
| Software | |||
| Configuration software | Extron Global Configurator ? Plus and Professional | ||
| Utilities | Toolbelt, embedded web page | ||
| Ethernet | |||
| Network interface controllers (NICs) | 1 | ||
| Connectors | 1 female RJ-45 connector | ||
| Data rate | 10/100Base-T, half/full duplex with autodetect | ||
| Protocols | DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1 |
||
| Serial | |||
| Quantity/type | 1 bidirectional RS-232 | ||
| Connectors | (1) 3.5 mm captive screw connector, 3-pole | ||
| Baud rate and protocol | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity |
||
|
|||
| Pin configuration | Pin 1 = Tx, 2 = Rx, 3 = Gnd | ||
| Digital I/O | |||
| Quantity/type | 4 digital input/output (configurable) | ||
| Connectors | (1) 3.5 mm captive screw connector, 6-pole | ||
| Digital inputs | |||
| Input voltage range | 0 to 24 VDC, clamped at +30 VDC | ||
| Input impedance | >10k ohms | ||
| Programmable pullup | 1k ohms to +5 VDC | ||
| Threshold low to high | 2.8 VDC | ||
| Threshold high to low | 2.0 VDC | ||
| Digital outputs | 250 mA sink from 24 VDC max. | ||
| Pin configurations | Pins 1, 2, 4, 5 = digital I/Os 1, 2, 3, 4; pins 3, 6= Gnd | ||
| IR | |||
| Quantity/type | 1programmable TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz | ||
| Connector | (1) 3.5 mm captive screw connector, 2-pole | ||
| Pin configuration | Pin 1 = signal, 2 = Gnd | ||
| IR output carrier frequency | 30 kHz to 300 kHz | ||
| General | |||
| Power supply | External, included Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 4.2 A, 50 watts |
||
| Power consumption | |||
| System | |||
| Device | TBD watts | ||
| Device and power supply | TBD watts | ||
|
|||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on top and sides | ||
| Thermal dissipation | |||
| System | |||
| Device | TBD BTU/hour | ||
| Device and power supply | TBD BTU/hour | ||
| Mounting | |||
| HCT 101 EU | |||
| Furniture or wall mount | Yes, with an EU 1-gang electrical junction box and included EU 1-gang frame | ||
| HCT 101 MK | |||
| Furniture or wall mount | Yes, with an MK 1-gang electrical junction box and included MK 1-gang frame | ||
| HCR 102 | |||
| Rack mount | Yes, with optional 1U high rack shelf or back of the rack mounting kit | ||
| Furniture mount | Yes, with included, attached MBU 125 under-desk mounting brackets | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | |||
| HCT 101 EU | |||
| Frame | 3.17" H x 3.17" W x 0.40" D (1-gang) (81 mm H x 81 mm W x 10 mm D) |
||
| Device | 2.17" H x 2.17" W x 1.60" D (55 mm H x 55 mm W x 41 mm D) (Excludes faceplate. Fits mounting frames that accept 55 mm x 55 mm modules and fits many 1 gang EU junction boxes. Allow at least 2.4" [61 mm] depth in the wall or furniture.) |
||
 |
|||
| HCT 101 MK | |||
| Frame | 3.39" H x 3.39" W x 0.40" D (1-gang) (86 mm H x 86 mm W x 10 mm D) |
||
| Device | 2.17" H x 2.17" W x 1.60" D (55 mm H x 55 mm W x 41 mm D) (Excludes faceplate. Fits mounting frames that accept 55 mm x 55 mm modules and fits many 1 gang EU junction boxes. Allow at least 2.4" [61 mm] depth in the wall or furniture.) |
||
 |
|||
| HCR 102 | 1.0" H x 8.75" W x 6.0" D (half rack wide) (25 mm H x222 mm W x 152 mm D) (Depth excludes connectors.) |
||
| Product weight | |||
| HCT 101 EU, HCT 101 MK | TBD lb (TBD kg) | ||
| HCR 102 | 1.2 lbs (0.6 kg) | ||
| Regulatory compliance | CE**, C-tick, c-UL, FCC Class A**, ICES, UL, VCCI Complies with the appropriate requirements of RoHS, WEEE |
||
|
|||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (4525-D1-011819) | |||
